Photographs & History

Photographs and History

Creswell Station

Plate drawing circa 1963 of Port and Cres interlocking, controlled by the operator in Cola tower, which was in Columbia. Interlocking plate collection of       The Broad Way    .

Plate drawing circa 1963 of Port and Cres interlocking, controlled by the operator in Cola tower, which was in Columbia. Interlocking plate collection of The Broad Way.

Just five miles south of Columbia we come to a small village named Creswell Station, the location where the Atglen & Susquehanna Branch diverges from the Columbia & Port Deposit.  By far the longest stretch of new trackage built during the Low Grade project the diverging A&S alignment runs roughly 33 miles from Creswell across Lancaster County to the main line connection in Parkesburg. South from this junction (railroad east) the C&PD and A&S ran parallel along the Susquehanna as far south as Shenks Ferry with the A&S climbing a gentle .3% grade accumulating a significant difference in elevation between the two routes.

Wide view of Port Interlocking and the Susquehanna River. Note the grade separation with the A&S branch beginning the gentle climb over the Port Road .

Wide view of Port Interlocking and the Susquehanna River. Note the grade separation with the A&S branch beginning the gentle climb over the Port Road .

Originally controlled locally by an interlocking tower, two remote control points know as Port and Cres were implemented during the 1938 electrification project, controlling a single jump-over arrangement allowing the two lines to intersect with out fouling the opposing main track. Controlled by the operator in Cola tower, this was one of several remote controlled interlocking points along the A&S and C&PD. Port controlled the east and west connections between the A&S and Port Road and was the boundary between the Chesapeake and Philadelphia Divisions. Cres controlled the convergence of the two main tracks to one on the eastern limit of the interlocking on the Port Road. The C&PD to the south/ east of here was all single track with passing and sidings.

A&S jump-over bridge looking east at Port/ Cres interlocking. The track below is the westward main track of the Columbia and Port Deposit branch. Around the bend below is Cres, where this track meets with the eastward main and narrows to one track. Note the transmission poles that are still used to support Amtrak’s feeder line from Safe Harbor to Royalton preserving for now some of the visual characteristics of the original PRR infrastructure.

A&S jump-over bridge looking east at Port/ Cres interlocking. The track below is the westward main track of the Columbia and Port Deposit branch. Around the bend below is Cres, where this track meets with the eastward main and narrows to one track. Note the transmission poles that are still used to support Amtrak’s feeder line from Safe Harbor to Royalton preserving for now some of the visual characteristics of the original PRR infrastructure.

Creswell Station served as a strategic junction until Conrail abandoned the A&S branch in favor of the Reading Main Line in December of 1988. The A&S languished for many years, rusting away until the property was turned over to the local municipalities to create a network of rail trails for the general public. Though the segment from Creswell to Shenks Ferry has yet to be converted, planning has begun to transform this former right of way into a linear park along the beautiful Susquehanna River.

Atglen and Susquehanna Branch

Highlights of upcoming posts on the PRR’s A&S branch which completed the Low Grade network between Morrisville and Enola. Historical Images included in grid from the (Top row, middle, center row middle) Columbia Historic Preservation Society, Columbia, PA; The Kline Collection, Railroad Museum of Pennsylvania, PHMC (center row, right) and Moores Memorial Library, Christiana, PA (bottom row, left).

Highlights of upcoming posts on the PRR’s A&S branch which completed the Low Grade network between Morrisville and Enola. Historical Images included in grid from the (Top row, middle, center row middle) Columbia Historic Preservation Society, Columbia, PA; The Kline Collection, Railroad Museum of Pennsylvania, PHMC (center row, right) and Moores Memorial Library, Christiana, PA (bottom row, left).

The Pennsylvania Railroad’s Atglen and Susquehanna Branch was an integral segment of the Low Grade network, a through route dedicated to freight traffic that stretched approximately 140 miles from Morrisville to Enola, bypassing the congestion of Philadelphia and Lancaster.  At a price of nearly $20 million dollars, the A&S Branch spanned Lancaster County creating the final link of this ambitious project. Constructed on earthen fill and etched through the stone hills of the Chester and Susquehanna Valleys the route connected to the Northern Central Railway at Wago Junction continuing east to Parkesburg where it linked back to the main line. A major piece of this route would include a new 33-mile segment between Cresswell and Parkesburg. To construct the A&S the Pennsylvania Railroad excavated an estimated 22 million yards of earth and rock while building roughly 80 bridges and culverts to create a modern superhighway for freight traffic.  At the time of its dedication on July 27, 1906, the line would be the largest construction project in the railroad’s history to date. Once completed, the A&S and the larger Low Grade would give the PRR an unrivalled route that provided access to all the major port cities the railroad served with a vital link to the four track main line system west.

During the 1938 electrification project, the A&S and the rest of the Low Grade would see the change from steam to electric locomotives with power coming from the Safe Harbor Hydroelectric Plant located on the Susquehanna River. This early “green” facility not only powered the trains of the A&S but through a tether of high voltage transmission lines along the route, fed major sub-stations along the Main Line and what is know today as the Northeast Corridor. The engineering accomplishment would serve the PRR well through the onslaught of traffic during World War II without major issue, but after the war, traffic would decline sending many railroads into financial crisis. Through bankruptcy and merger the ill-fated Penn Central and subsequent creation of Conrail, the A&S and other parts of the Low Grade would be abandoned in favor of the former Reading route to Harrisburg. On December 19th, 1988 the last freight train would traverse the A&S bringing an end to 82 years of freight service on this remarkable piece of railroad.

Map highlighting the A&S Branch from Safe Harbor to Parkesburg.

Map highlighting the A&S Branch from Safe Harbor to Parkesburg.

Since the last train the right of way languished in abandonment, however the transmission lines were retained to continue feeding the substations on the former PRR electrified network. In 2011 Amtrak moved to upgrade the former catenary / transmission line supports with modern mono-poles, while the local municipalities have taken possession of the right of way with some creating a beautiful rail-trail route through the heart of Lancaster County.

Over the next several months we will explore the A&S in detail, looking at the modern remains as well as historical images of the line during construction and operation. I am excited to share a thorough account of an engineering project that speaks to the ability and character of the Pennsylvania Railroad and their claim to being the Standard Railroad of the World!

Columbia, Pennsylvania: 20th Century and the PRR Improvements Project

The area of Columbia along Front Street is host to Cola Interlocking. In this view looking east from the Chestnut Street bridge you can view the eastern limits of expansive interlocking which provides access to the original Philadelphia and Columbia Branch to Lancaster (diverging left) with the original Columbia and Port Deposit (Main Line to the right). To the west the PRR would become known as the York Haven line or Enola Branch. Note the 1877 PRR station, which survives along North Second Street.

The area of Columbia along Front Street is host to Cola Interlocking. In this view looking east from the Chestnut Street bridge you can view the eastern limits of expansive interlocking which provides access to the original Philadelphia and Columbia Branch to Lancaster (diverging left) with the original Columbia and Port Deposit (Main Line to the right). To the west the PRR would become known as the York Haven line or Enola Branch. Note the 1877 PRR station, which survives along North Second Street.

By the late 1800’s the Pennsylvania Railroad had developed into a well-heeled transportation system but the rapid growth of industry would necessitate system wide improvements to bring the railroad into the 20th century. In 1902 PRR President Alexander J. Cassatt and Chief Engineer William H. Brown would embark on a series of projects to eliminate bottlenecks and operational problems across the system. 

After the PRR acquired control of the Philadelphia and Columbia Railway through the purchase of the Main Line of Public Works in 1857, various segments were improved during the second half of the 19th century. The route between Philadelphia and Lancaster became an integral part of the PRR Main Line connecting with the former Harrisburg & Lancaster creating the line we know today as Amtrak’s Keystone Corridor. The western end of the P&C would become a branch connecting the industrial and agricultural areas of Lancaster and Columbia. Due to the stiff grades both segments were less than ideal for heavy freight traffic. In addition to the P&C property accessing Columbia, the PRR had also gained controlled of the Harrisburg & Lancaster Railroad’s Columbia branch via Royalton and the Columbia & Port Deposit by the mid to late 1800's, further establishing Columbia as an important railroad hub. Though much of these water level alignments provided a network to move freight to Harrisburg, Cassatt sought to build a new route east from Columbia running across Lancaster County to create a modern freight bypass from New York and Philadelphia to the Harrisburg area and the main line west.

Plate drawing circa1963 Cola Interlocking which controlled the junction of the York Haven line, Columbia branch and Columbia and Port Deposit as well as access to the local freight yard. This interlocking was part of a Centralized Traffic Control system that controlled a much larger district of trackage and interlockings. Collection of    The Broad Way   .

Plate drawing circa1963 Cola Interlocking which controlled the junction of the York Haven line, Columbia branch and Columbia and Port Deposit as well as access to the local freight yard. This interlocking was part of a Centralized Traffic Control system that controlled a much larger district of trackage and interlockings. Collection of The Broad Way.

The Low Grade as it was planned would run right through Columbia using the current alignment. From the east and west new construction would connect existing segments of the H&L and C&PD creating an improved main line designed to move freight on a new grade separated line. This new route would divert most freight traffic off the main line all together between Parkesburg and Harrisburg. Enola yard was completed in 1906 as part of the low grade project functioning as the western anchor for all freight trains and motive power between the Philadelphia and Middle Divisions. As a result Columbia importance as a major terminal would diminish due to its close proximity to the new facility, resulting in a significant loss of jobs in the area. Compounded by the diminishing local industry, a result of depleted ore and lumber resources, Columbia’s economy would begin a downward trend that continued through the Great Depression.

Cola tower was built in 1938 during the electrification to centralize traffic control on this freight network. Its jurisdiction reached forty miles to the east on the Port Road including the connection to the A&S branch while also controlling tracks to Shocks Mill and Lancaster via the Columbia branch.

Cola tower was built in 1938 during the electrification to centralize traffic control on this freight network. Its jurisdiction reached forty miles to the east on the Port Road including the connection to the A&S branch while also controlling tracks to Shocks Mill and Lancaster via the Columbia branch.

More change came on the PRR with the electrification of their network of rail lines in the Northeast.  One of the last segments of the ambitious project was completed in 1938 affording the PRR the benefit of electric traction on the Low Grade, Columbia branch and Columbia & Port Deposit. During the electrification project, the PRR also consolidated many of the early towers with two modern CTC facilities controlling most of this freight network. Cola tower in Columbia controlled all trains on the Columbia Branch to Lancaster, roughly forty miles of the Columbia & Port Deposit Branch including the junction with the A&S Branch at Port and the York Haven Line west to Shocks Mill. Cola’s jurisdiction over the C&PD was unique in that most of the line was actually under control of the Baltimore Dispatcher and was considered part of the Chesapeake Division, while Cola was part of the Philadelphia Division.

View looking west from the Columbia Branch near the Mill Street crossing. This is the original Philadelphia & Columbia alignment and is operated by NS to access Lancaster area industries and Dillerville Yard, the center of freight operations in the area. Note the steep descent of the branch, compared to the Low Grade visible to the left, which utilized heavier catenary supports on account of it supporting high voltage transmission lines to Royalton. In typical PRR fashion the Columbia branch was maintained to high standards including the use of catenary to provide a relief route in the event there was wreck on neighboring lines.

View looking west from the Columbia Branch near the Mill Street crossing. This is the original Philadelphia & Columbia alignment and is operated by NS to access Lancaster area industries and Dillerville Yard, the center of freight operations in the area. Note the steep descent of the branch, compared to the Low Grade visible to the left, which utilized heavier catenary supports on account of it supporting high voltage transmission lines to Royalton. In typical PRR fashion the Columbia branch was maintained to high standards including the use of catenary to provide a relief route in the event there was wreck on neighboring lines.

The Low Grade and electrification would survive the Penn Central debacle but ultimately met its demise after the creation of Conrail. Due to the high cost of electric supply charges, the aging infrastructure and the dependency on Amtrak to move trains east of Parkesburg it was decided to abandon an integral part of the system in favor of the neighboring Reading Railroad Main Line ending over 80 years of service on perhaps one of Cassatt and Brown’s greatest achievements. The Columbia and Port Deposit survives as Norfolk Southern’s artery to Maryland’s Eastern Shore and the Port of Baltimore. The former P&C to Lancaster provides NS a dedicated connection to Dillerville yard servicing the industrial areas around the seat of Lancaster County. Though not what used to be Columbia still sees a parade of freight daily, though mostly nocturnal, moving freight as Cassatt had envisioned over a century ago.

Making the Shot

Last year I commenced work photographing the Eastern End of the former PRR from Harrisburg to Philadelphia, and the current "Northeast Corridor" from New York to Washington DC with the incredible cooperation of Amtrak and Historic Architect John Bowie Associates. This project presented a number of new opportunities and experiences for me, and some adjustments too! Though Norfolk Southern freight traffic was heavy on the western mainline from Harrisburg to Pittsburgh the line is fairly accessible by public roads, overpasses, and hiking trails. The electrified territory however represents a number of challenges that were not a consideration further west. For one: high speed electrified trains, two: limited access/ visibility because of electric traction (catenary) systems and a mainline that is largely grade separated, three: many in tact and operating PRR facilities that have been re-purposed or are still used to manage traffic flow along the line. While later is very exciting the first two are a little nerve wracking until you are put in the good hands of Amtrak's safety crews.

Safety training and planning for this project started early on, visiting various sites requires commitments from Amtrak officials to ensure that everyone on-site its educated on what to expect and that there is a chain of command to ensure all parties are not at risk while working on, or near the tracks. Having said this, I want to be clear to anyone who reads this: This work is done with permission utilizing proper safety precautions, and while I make an effort not to include people in the images here on the blog, they are there, keeping an eye out for me while I am working!  I do not in any way support trespassing on private property, especially when moving equipment can put you or other individuals at risk!

View looking East from #2 Track. Note the historic 1929 train station complex and Cork interlocking tower (right - just past bridge). This line has recently seen upgrading including new track and signal systems as far as Harrisburg for Amtrak's Keystone Service and daily Pennsylvanian to Pittsburgh.

View looking East from #2 Track. Note the historic 1929 train station complex and Cork interlocking tower (right - just past bridge). This line has recently seen upgrading including new track and signal systems as far as Harrisburg for Amtrak's Keystone Service and daily Pennsylvanian to Pittsburgh.

Lancaster

Having said that I wanted to provide and great example of an image that was made in the last few weeks at the Lancaster, Pennsylvania station area. The large black and white image is the image I made using my standard camera of choice, a 5x7 view camera, this camera requires patience and concentration in addition to a strong back to lug it around, particularly on this 90+ degree day!

The inset image, taken by Cassidy Hobbs, a Drexel Student and architecture intern with Amtrak, shows (from left to right), the watchman, myself (setting up the shot), and the safety foreman. This shot was made  across the main tracks on the West End of the station complex. This set up is typical when within 15' of the track area, and without this protection you are trespassing! While I look forward to sharing more imagery on this part of the project, I will remind my viewers about safety, since its a big concern for all of us on this project!